당사 웹 사이트에서는 고객 맞춤 서비스를 제공하기 위해 쿠키를 사용합니다. 웹 사이트 탐색을 계속하면 쿠키 사용에 동의하시게 됩니다. 추가 정보

닫다 Close Cookie Notification
Instron
  • Back
  • Home
  • 제품
    시험기
    만능재료시험기
    구조물 내구성 시험기
    자동화 시험기
    레오미터 및 유동성 시험기
    동적 및 피로 시험기
    충돌 시뮬레이션
    비틀림 시험기
    낙하 충격시험기 / 펜듈럼 충격시험기
    HDT 및 VICAT
    생산 중단된 시스템
    액세서리
    소프트웨어
    로드셀
    박리, 마찰, 관통
    온도 챔버 및 고온로
    인장 그립
    굴곡 치구
    압축판
    바이오메디컬 치구
    신율계
    복합 비품
    전자분야 치구
    시편 측정 및 준비
    모든 액세서리
    액세서리 카탈로그
  • 산업 솔루션
    재료별 표준규격별 시험유형별
    산업별
    자동차
    바이오메디컬
    전자
    기재
    자동차
    바이오메디컬
    전자
  • 서비스 및 지원
    Instron Remote Technical Support 제품 수명 주기
    교육
    온라인 e-러닝
    서비스
    검교정
    Instron 운영지원
    기술 지원
    FAQs
    소프트웨어 업데이트 서비스
    자료
    매뉴얼
    시리얼번호
  • 회사소개
    채용 보도자료 뉴스레터 구독
    회사소개
    역사
    위치
    인증 및 성적서
    자료
    용어설명
    시험방법
    뉴스레터
    문헌 라이브러리
    뉴스
    이벤트
    Webinars
    사례연구
  • 연락처
  • 대한민국
시험솔루션 » 시험방법에 의한 분류 » 유동성 » ISO 11443 Heat-Curing Elastomers

ISO 11443 – Rheology of Heat-Curing Elastomers/Silicone at Room Temperature

Specimen

  • 육면체
  • high-performance polymer
  • Plastics
  • Test Blocks

Test Types

  • 유동성

Standard

  • ISO 11443
  • ASTM D3835

Business Sector

  • 건축/건설
  • 항공우주산업 및 공급업체
  • 바이오메디컬/의료산업/헬스케어
  • 소비재/산업재
  • 자동차/트럭/철도/조선

Materials

  • 고무/합성고무
Contact usView Accessories Catalog
VisualRHEO Software for Capillary Rheometers
CEAST SR20
Piston and Dies
  • VisualRHEO Software for Capillary Rheometers
  • CEAST SR20
  • Piston and Dies
  • 설명
  • Literature

Heat-cured elastomers/silicone materials have a variety of different applications - ranging from automotive to biomedical - thanks to great characteristics including: flexibility and durability, chemical resistance, fatigue and compression resistance, sealing and insulating properties. Depending on the specific chemistry and compounding, the uncured material can be processed by extrusion, injection molding, or compression molding, and cured by different methods. Rheology plays an important part in characterizing these materials and reproducing the flow conditions of the industrial process.

We were asked to test two types of silicone materials designed for heat curing. This request was to understand their processability and to check the feasibility of testing these materials at room temperature with a capillary rheometer without inducing a curing reaction. We used a CEAST SR50 Twin Bore Capillary Rheometer (15 mm bore barrel diameter), with a 40 kN load cell mounted at the top of each piston and a barrel-mounted 100 MPa pressure transducers positioned slightly above the entrance of capillary dies. The instrument was equipped with two capillary dies (1 mm diameter and 20 mm length, flat entrance) in order to run the two samples simultaneously, looking for any difference in the response in a shorter time. We used CEAST VisualRHEO software to analyze the rheological results. Rheological tests, in accordance to ISO 11443 and ASTM D3835, were performed at room temperature by applying constant shear rate steps (from 10 s-1 – 1000 s-1) and measuring the pressure. Tests were repeated several times for each sample to evaluate the repeatability of results.

The software calculated and plotted full rheological curves (viscosity [Pa*s] vs shear rate [s-1]), with both samples showing a non-Newtonian (shear thinning) behavior. The viscosity range measured for the first sample was between 18000 Pa*s and 300 Pa*s, whereas the second sample gave values between 9000 Pa*s and 200 Pa*s in the same range of shear rate. The latter showed some instability of the flow at 10 s-1 with pressure fluctuations. All the curves for each sample were perfectly overlapping, demonstrating good repeatability of results. However, significant differences could be observed between samples, hence the utility of the rheometer in discriminating different process behaviors and relating them to different formulations. The simple, off-line rheometer tests were able to indicate that the first material was better suited for extrusion at room temperature.

CEAST SmartRHEO Series: Capillary Rheometer Systems

Thermoplastic materials are processed as fluids under the effect of temperature and pressure. The ability of plastics to be formed into a wide variety of shapes, by the common plastics conversion processes, has a fundamental importance in polymer science and application. The innovative Instron® line of CEAST SmartRHEO Series of Capillary Rheometer systems are designed for an accurate investigation of the rheological properties of polymeric materials.

  • 제품소개
  • 9/22/2014
  • 3.5 MB

Region Selector

Dismiss Region Selector

Americas

  • North America
  • Brasil
  • South America

All Other Countries

  • Global Site

Europe

  • France
  • Deutschland
  • Italia
  • Polska
  • España
  • Türkçe
  • United Kingdom

Asia Pacific

  • 中国
  • India
  • 日本
  • 대한민국
  • 台灣
  • ประเทศไทย
Instron Logo White
연락 정보

16FI, Hae-Am Building,
983-3 Daechi-dong,
Kangnam-gu, Seoul 135-842

영업문의 :  +82 2 552 2311

서비스 문의 :  +82-2-552-2315

유용한 링크
  • 시험기
  • 소프트웨어
  • 액세서리
  • 카탈로그
  • 용어 설명
  • 라이브러리
  • 시험 솔루션
  • 뉴스레터
  • Webinars
  • 사례 연구
  • 이벤트
  • 채용
Policies / Legal
  • 개인정보 보호 및 쿠키 정책
  • 사용약관
  • 수출제한법규
  • 개인정보보호(GDPR)
Instron 소셜미디어
뉴스레터 신청
이메일 주소
© Illinois Tool Works Inc. All rights reserved.
[email protected]
  • 개인정보 보호 및 쿠키 정책
  • 사용약관
  • 수출제한법규
  • 개인정보보호(GDPR)