플라스틱 제품에 대한 HDT와 VST 시험 (ISO 75와 ISO 306)
전통적으로 실리콘 오일은 폴리머(polymer)에 대한 열변형 온도(HDT)와 연화온도(VST) 시험을 수행하는데 있어 가장 인기 있는 매질입니다. 시험 원리과 과정은 간단하고, 실리콘 오일을 기본으로 하는 시험 시스템은 잘 정립되어 있지만 최대 280°C의 온도까지에서만 시스템이 안전하게 사용될 수 있습니다.
폴리에텔에텔 케톤(PEEK)와 폴리에테르이미드(PEI)와 같은 고온용 폴리머는 높아지는 기계적, 열적 특성으로 인해 폴리머 산업에서의 수요가 높아지고 있습니다. 이러한 폴리머들은 실리콘 오일이 사용될 수 있는 온도보다 높은 GDT와 VST를 갖고 있기 때문에, 이러한 고온용 폴리머를 시험하는 데에는 이를 대체할 수 있는 매질이 필요합니다. 우리는 각각 ISO 75-1&2와 ISO 306 Method B에 따라 고온과 저온 적용을 위한 다양한 HDT와 VST 시험을 수행하기 위해 산화알루미늄 유동항온조를 활용하는 CEAST HV500을 사용합니다. 우리는 다른 품질의 PEEK, 폴리스티렌(PS), 폴리카보네이트(PC), 폴리아미드(PA), 폴리페닐렌 황화물(PPS-40% glass fillers) 및 폴리프로필렌(PP-15% glass fillers)를 앞서 언급한 ISO 표준에 따르는 50ºC/h와 120ºC/h의 온도 가열 조건에서 시험하였습니다.
산화알루미늄을 사용한 시스템으로부터 획득한 결과를 전통적인 실리콘 오일 시스템으로부터 획득한 결과와 280°C이하에서의 HDT 결과와 비교하였습니다. 한 회당 12개의 시편과 함께, HDT 시험의 통계분석은 두 매질 간에 최대 5%의 오차 범위 내로 매우 반복적이고 재현 가능한 결과를 보여주었습니다. 우리는 280°C보다 높은 HDT또는 VST를 지닌 고온용 폴리머를 위해서는 산화알루미늄을 사용하는 유동항온조 시스템을 추천합니다. 시험이 전통적인 실리콘 오일 시스템으로부터 획득한 결과와 일치한다면, 저온용 폴리머 또한 산화알루미늄 유동항온조 시스템으로 시험할 수 있습니다.
Instron HV Series for HDT and Vicat Testing
The effect of temperature on the mechanical properties of plastic materials has a fundamental role in the design of components, especially in the selection of materials. Unlike metals and ceramics, plastics are extremely sensitive to the slightest changes in temperature. The selection of plastics for applications under different temperatures is a complex task. The material must be able to support a stress under operating conditions without losing its strength and without critical distortion. The effect of temperature on geometrical stability and mechanical properties in general can be studied following different procedures and methods like at constant temperature or with a temperature ramp.
- 제품소개
- 6/21/2018
- 1.2 MB