산업 시리즈 LX 모델
주로 고용량 인장 시험을 위해 디자인된 단일 시험 공간을 가진 LX 시스템은 압축, 굴곡 및 전단 시험이 가능합니다. LX 모델은 시험에 필요한 힘을 제공하는 긴 액츄에이터를 움직이는 유압 펌핑 시스템을 동력으로 이용합니다.
특징
- 하중 프레임, 유압 공급 장치, 전자 제어 회로 및 제어판이 하나의 패키지로 통합된 일체형 디자인으로 바닥 공간을 60% 이상 절약할 수 있습니다.
- 크고 접근하기 쉬운 단일 시험 공간과 긴 시험 거리를 가진 적응력이 좋은 프레임으로 다양한 사이즈의 시편과 그립, 치구, 고온로 및 신율계 등을 편리하게 장착하여 사용할 수 있습니다.
- 디지털 제어회로는 높은 정밀도와 빠른 반응속도를 보장합니다 - 집적된 콘트롤러는 스위치나 별도의 조절장치 없이도 센서들을 자동으로 인식하고 교정하여 줍니다.
- Partner™ 또는 Bluehill® 2 만능 재료 시험 소프트웨어를 사용하여 작동의 편이성과 유연성을 극대화 하였습니다.
- 패스너, 체인, 나사산 형태 및 아령형 시편, 와이어 로드 및 판상 재료 등 다양한 형태의 재료에 대한 인장 시험에 이상적입니다.
- 시험 공간의 높이 조절을 위하여 수동식 크로스헤드 잠금장치 및 노치 컬럼 또는 자동식 리프트 및 잠금장치를 선택할 수 있습니다.
모델 종류
- 300LX - 300 kN (67,500 lbf)
일반적인 응용 분야
- 체인
- 부품
- 복합재료
- 패스너
- 금속
- 철근
- 튜브 및 파이프
- 와이어 로드
High Force Universal Testing Machines | 100 kN and Above Testing Capacity
Instron® high force universal testing machines perform tensile, compression, bend, peel, tear, and other mechanical tests on materials and products to ASTM, ISO, and other industry standards. These systems are available in a range of sizes and maximum force capacities. From electromechanical systems used to test high-strength metals and advanced composites to static-hydraulic systems for testing materials used in civil infrastructure, Instron has systems suitable for all applications.
- 제품소개
- 8/10/2020
- 3.9 MB
Industrial Series LX Models
Featuring a large, single test space and single footprint, LX Models are designed for high-capacity tension, compression, bend/flex, and shear testing.
- 제품소개
- 11/20/2017
- 491.4 KB
Bluehill® Universal Software
Bluehill Universal은 기초부터 터치 인터페이스를 위해 구성되었습니다. 꼼꼼하게 짜여진 디자인과 새로운 세로 방향의 레이아웃은 통합 컨트롤러를 갖춘 대형 터치 모니터를 이용하여 작업자 대시보드에서 시험 작업영역을 포괄적으로 확인할 수 있도록 합니다.
- 제품소개
- 9/13/2017
- 4.6 MB
Hydraulic Wedge-Action Grips
Instron® hydraulic wedge grips provide an innovative solution for high capacity testing and deliver enhanced gripping performance, usability, and operator safety.
- 제품소개
- 11/11/2011
- 1.0 MB
LX Static Hydraulic Universal Testing System - Pre-Installation Manual
The information in this document is intended to aid customers in the site preparation, unpacking, lifting, and installation of the Instron Model LX Static Hydraulic Universal Testing Systems. These instructions assume the following: • Your system consists of a frame, a hydraulic power supply, a control unit, a computer system with an Instron materials testing software package, and any testing accessories necessary to secure the specimen in the test space. It is important that the site be adequately prepared in order to avoid unnecessary delays in the installation process and to ensure that the testing system operates without interference from various environmental conditions (i.e. excess building vibrations or extreme temperature and humidity levels).
- 매뉴얼
- 7/21/2020
- 0.9 MB
LX Static Hydraulic Universal Testing System - Operating Instructions
These instructions describe the function, operation and maintenance for various models of the LX testing systems. If unsure of your specific model, refer to “System identification” on page 12. These instructions assume the following: • You are an operator familiar with the operation of materials testing systems in general. • Your system has been installed in its final location according to the requirements outlined in the system’s Pre-Installation Manual. • Your system consists of a frame, a hydraulic power supply, a control unit, a computer system with an Instron materials testing software package, and any testing accessories necessary to secure the specimen in the test space. • Software test methods that are appropriate for your testing requirements are available. These instructions do not include the development of test methods within the materials testing software. This is covered in more advanced training that can be provided by Instron Service and Training departments.
- 매뉴얼
- 7/21/2020
- 1.9 MB
LX Static Hydraulic Universal Testing System - System Concepts Manual
These instructions provide additional information beyond what is necessary to operate the various models of the LX testing systems. These instructions are intended for a laboratory or facilities supervisor, or Instron service personnel. These instructions assume the following: • You are an operator familiar with the operation of materials testing systems in general. • Your system has been installed in its final location according to the requirements outlined in the system’s Pre-Installation Manual. • Your system consists of a frame, a hydraulic power supply, a control unit, a computer system with an Instron materials testing software package, and any testing accessories necessary to secure the specimen in the test space. • Software test methods that are appropriate for your testing requirements are available. These instructions do not include the development of test methods within the materials testing software. This is covered in more advanced training that can be provided by Instron Service and Training departments.
- 매뉴얼
- 7/21/2020
- 2.4 MB
LX Static Hydraulic Universal Testing System - Reference Manual
This Equipment Reference Manual has been prepared to provide customers with assembly drawings and schematics that pertain to the various models of LX Static Hydraulic Universal Testing Systems.
- 매뉴얼
- 7/21/2020
- 3.2 MB