당사 웹 사이트에서는 고객 맞춤 서비스를 제공하기 위해 쿠키를 사용합니다. 웹 사이트 탐색을 계속하면 쿠키 사용에 동의하시게 됩니다. 추가 정보

닫다 Close Cookie Notification
Instron
  • Back
  • Home
  • 제품
    시험기
    만능재료시험기
    구조물 내구성 시험기
    자동화 시험기
    레오미터 및 유동성 시험기
    동적 및 피로 시험기
    충돌 시뮬레이션
    비틀림 시험기
    낙하 충격시험기 / 펜듈럼 충격시험기
    HDT 및 VICAT
    생산 중단된 시스템
    액세서리
    소프트웨어
    로드셀
    박리, 마찰, 관통
    온도 챔버 및 고온로
    인장 그립
    굴곡 치구
    압축판
    바이오메디컬 치구
    신율계
    복합 비품
    전자분야 치구
    시편 측정 및 준비
    모든 액세서리
    액세서리 카탈로그
  • 산업 솔루션
    재료별 표준규격별 시험유형별
    산업별
    항공우주
    자동차
    바이오메디컬
    전자
    산업별
    자동차
    바이오메디컬
    전자
  • 서비스 및 지원
    Instron Connect 제품 수명 주기
    교육
    온라인 e-러닝
    서비스
    검교정
    Instron 운영지원
    기술 지원
    FAQs
    소프트웨어 업데이트 서비스
    자료
    매뉴얼
    시리얼번호
  • 회사소개
    채용 보도자료 뉴스레터 구독
    회사소개
    역사
    위치
    인증 및 성적서
    자료
    용어설명
    시험방법
    뉴스레터
    문헌 라이브러리
    뉴스
    이벤트
    Webinars
    사례연구
  • 연락처
  • 대한민국
제품소개 » 시험기 종류 » 만능시험기 » 고하중 만능재료시험기 » Static Hydraulic Industrial Series » DX 모델

산업 시리즈 DX 모델

Contact usView Accessories Catalog
  • Photos
  • Videos
300DX 59 Series
150DX G1E
300DX with Split Insert Tensile Grips and .505 Specimen
Instron Industrial series grips with clip on extensometer
Industrial Series Grips with B Bolt holders
600DX-G8 Compression Only Model
  • 300DX 59 Series
  • 150DX G1E
  • 300DX with Split Insert Tensile Grips and .505 Specimen
  • Instron Industrial series grips with clip on extensometer
  • Industrial Series Grips with B Bolt holders
  • 600DX-G8 Compression Only Model
  • 설명
  • Software
  • Literature
  • Applications
고용량 인장, 압축, 굴곡 및 전단 시험을 위해 디자인된 DX 모델은 시험에 필요한 힘을 제공하는 피스톤을 움직이는 유압 펌핑 시스템을 동력으로 이용합니다.

특징

  • 하중 프레임, 유압 공급 장치, 전자 제어 회로 및 제어판이 하나의 패키지로 통합된 일체형 디자인으로 바닥 공간을 60% 이상 절약할 수 있습니다.
  • 사용자가 무거운 치구를 제거할 필요없이 인장 및 압축 시험으로 신속히 변경할 수 있도록 이중 시험 공간을 가진 다용도 프레임으로 디자인 되었습니다.
  • 노치가 있는 컬럼 디자인으로 상부 크로스헤드의 위치가 조절됩니다.
  • 디지털 제어회로는 높은 정밀도와 빠른 반응속도를 보장합니다 - 집적된 콘트롤러는 스위치나 별도의 조절장치 없이도 센서들을 자동으로 인식하고 교정하여 줍니다.
  • Partner™ 또는 Bluehill® 2 만능 재료 시험 소프트웨어를 사용하여 작동의 편이성과 유연성을 극대화 하였습니다.
  • 내장형 웨지 그립 - 브이 홈 또는 평판형 페이스를 이용하여 봉재, 판재, 튜브, 파이프, 시트 및 와이어 종류의 시편을 시험할 수 있습니다.
  • 완전 개방형 크로스헤드 및 유압식 그립 작동 장치를 이용하여 안전성을 최대로 유지하면서도 가장 효율적인 생산성을 이룰 수 있습니다. 

모델 종류

150DX
  • 150 kN (33,750 lbf)
300DX
  • 300 kN (67,500 lbf)
600DX
  • 600 kN (135,000 lbf)

일반적인 응용 분야

  • 콘크리트
  • 패스너
  • 고강도 복합재료
  • 금속 - 봉재, 판재, 튜브, 파이프
  • 철근
  • 와이어 로드
  • 목재

Bluehill Universal

High Force Universal Testing Machines | 100 kN and Above Testing Capacity

Instron® high force universal testing machines perform tensile, compression, bend, peel, tear, and other mechanical tests on materials and products to ASTM, ISO, and other industry standards. These systems are available in a range of sizes and maximum force capacities. From electromechanical systems used to test high-strength metals and advanced composites to static-hydraulic systems for testing materials used in civil infrastructure, Instron has systems suitable for all applications.

  • 제품소개
  • 8/10/2020
  • 3.9 MB

Industrial Series DX Models

Featuring a dual test space and single footprint, DX Models are designed for high-capacity tension, compression, bend/flex, and shear testing.

  • 제품소개
  • 9/7/2017
  • 0.6 MB

Bluehill® Universal Software

Bluehill Universal은 기초부터 터치 인터페이스를 위해 구성되었습니다. 꼼꼼하게 짜여진 디자인과 새로운 세로 방향의 레이아웃은 통합 컨트롤러를 갖춘 대형 터치 모니터를 이용하여 작업자 대시보드에서 시험 작업영역을 포괄적으로 확인할 수 있도록 합니다.

  • 제품소개
  • 9/13/2017
  • 4.6 MB

DX Static Hydraulic Universal Testing System - Pre-Installation Manual

The information in this document is intended to aid customers in the site preparation, unpacking, lifting, and installation of the Instron Model DX Static Hydraulic Universal Testing Systems. These instructions assume the following: • Your system consists of a frame, a hydraulic power supply, a control unit, a computer system with an Instron materials testing software package, and any testing accessories necessary to secure the specimen in the test space. It is important that the site be adequately prepared in order to avoid unnecessary delays in the installation process and to ensure that the testing system operates without interference from various environmental conditions (i.e. excess building vibrations or extreme temperature and humidity levels).

  • 매뉴얼
  • 7/14/2020
  • 1.0 MB

Model DX Static Hydraulic Universal Testing System - Operating Instructions

These instructions describe the function, operation and maintenance for various models of the DX testing systems. If unsure of your specific model, refer to “System identification” on page 14. These instructions assume the following: • You are an operator familiar with the operation of materials testing systems in general. • Your system has been installed in its final location according to the requirements outlined in the system’s Pre-Installation Manual. • Your system consists of a frame, a hydraulic power supply, a control unit, a computer system with an Instron materials testing software package, and any testing accessories necessary to secure the specimen in the test space. • Software test methods that are appropriate for your testing requirements are available. These instructions do not include the development of test methods within the materials testing software. This is covered in more advanced training that can be provided by Instron Service and Training departments.

  • 매뉴얼
  • 7/14/2020
  • 2.0 MB

DX Static Hydraulic Universal Testing System - Reference Manual

This Equipment Reference Manual has been prepared to provide customers with assembly drawings and schematics that pertain to the various models of DX Static Hydraulic Universal Testing Systems.

  • 매뉴얼
  • 7/20/2020
  • 1.7 MB

DX Static Hydraulic Universal Testing System - System Concepts Manual

These instructions provide additional information beyond what is necessary to operate the various models of the DX testing systems. These instructions are intended for a laboratory or facilities supervisor, or Instron service personnel. These instructions assume the following: • You are an operator familiar with the operation of materials testing systems in general. • Your system has been installed in its final location according to the requirements outlined in the system’s Pre-Installation Manual. • Your system consists of a frame, a hydraulic power supply, a control unit, a computer system with an Instron materials testing software package, and any testing accessories necessary to secure the specimen in the test space. • Software test methods that are appropriate for your testing requirements are available. These instructions do not include the development of test methods within the materials testing software. This is covered in more advanced training that can be provided by Instron Service and Training departments.

  • 매뉴얼
  • 7/14/2020
  • 1.8 MB

ISO 527-4 등방성 및 직교 섬유 강화 플라스틱 복합 재료의 인장 특성

Region Selector

Dismiss Region Selector

Americas

  • North America
  • Brasil
  • South America

All Other Countries

  • Global Site

Europe

  • France
  • Deutschland
  • Italia
  • Polska
  • España
  • Türkçe
  • United Kingdom

Asia Pacific

  • 中国
  • India
  • 日本
  • 대한민국
  • 台灣
  • ประเทศไทย
Instron Logo White
연락 정보

16FI, Hae-Am Building,
983-3 Daechi-dong,
Kangnam-gu, Seoul 135-842

영업문의 :  +82 2 552 2311

서비스 문의 :  +82-2-552-2315

유용한 링크
  • 시험기
  • 소프트웨어
  • 액세서리
  • 카탈로그
  • 용어 설명
  • 라이브러리
  • 시험 솔루션
  • 뉴스레터
  • Webinars
  • 사례 연구
  • 이벤트
  • 채용
Policies / Legal
  • 개인정보 보호 및 쿠키 정책
  • 사용약관
  • 수출제한법규
  • 개인정보보호(GDPR)
Instron 소셜미디어
뉴스레터 신청
이메일 주소
© Illinois Tool Works Inc. All rights reserved.
[email protected]
  • 개인정보 보호 및 쿠키 정책
  • 사용약관
  • 수출제한법규
  • 개인정보보호(GDPR)