CEAST 모델 9310
개요
9310 모델은 낙하추를 떨어뜨리는 기술을 사용하여 필름이나 라미네이트에 대한 충격을 조사하는 장비입니다. 이 장비는 계장화된 스트라이커와 DAS 16000 또는 DAS8000 뿐만아니라 ISO, ASTM, BS, NF 등의 표준에 따라 시험이 가능한 다양한 다트(darts)와도 함께 사용할 수 있습니다.
특징
9310 모델은 최대 충격 에너지 21 J (15.4 ft-lbs), 최대 충격 속도 3.7 m/s (12.1 ft/s), 최대 낙하 높이 0.7 m (27.5 inches)를 갖고 있습니다. 이 벤치 타입 시험기는 재료의 충격 저항에 대한 통계적 분석을 위한 계장화 되지 않은 스트라이커를 사용할 수도 있고 계장화된 텁(tup)과 CEAST DAS8000 및 DAS 16000 데이터 취득 장치와도 함께 사용할 수 있습니다. 낙하되는 크로스헤드는 두개의 교정된 스틸 칼럼에 의해 가이드되며 최대의 구조적 강성과 최소한의 동적 간섭을 갖도록 충격 에너지는 시편과 그 지지 장치를 통하여 직접 릴리즈 됩니다. 9310 모델은 특히 클램핑 플레이트를 간단히 거꾸로 해 주는 것으로 동일 치구를 이용하여 필름이나 견고한 시트를 시험할 수 있도록 해 주는 클램핑 방법으로 디자인 되었습니다. 텁(tup)은 계장화 및 비계장화 양쪽 모드에서 사용할 수 있으며 치수도 여러가지로 이용 가능합니다.
다음과 같은 표준을 만족하도록 디자인되고 제작되었습니다:
- ISO 6603-1
- ISO 6603-2
- ISO 7765-2
- ASTM D3763
- ASTM D5628 Method FD
- ASTM D7192
- 기타 유사 표준 규격
CEAST 9300 Series
Impact resistance is one of the most important properties for component designers to consider, as well as the most difficult to quantify. Impact resistance is a critical measure of service life and more importantly these days, it involves the perplexing problem of product safety and liability. With the combined experience of Dynatup® and CEAST, Instron® has more than 80 years experience in designing impact testing systems to simulate real-life impact conditions.
- 제품소개
- 4/19/2011
- 1.7 MB
CEAST Data Acquisition and Analysis
The new CEAST DAS 64K is a state-of-the-art Data Acquisition System designed for impact testing instruments. Compatible with the full range of CEAST impact testing systems, including pendulum type machines (CEAST 9000 Series) and drop towers (CEAST 9300 Series), it’s the key for instrumented impact testing. The DAS 64K also enables the data collection from instrumented tups or hammers on older models and non-CEAST impact machines.
- 제품소개
- 9/30/2013
- 0.5 MB