2210-920 | Expansion Channel Module for 5900 Series
2210-920 | Expansion Channel Module for 5900 Series
Expansion Channel Module Provides four or eight additional channels.
Includes separate power supply, on/off switch. Connected to 5900 or 59 Series controller via a cable.
Provides signal conditioning and calibration for transducers Same resolution as controller load and strain channels.
The additional channels can be used for test control. Supply voltage: 100 to 240 VAC 50/60 Hz (Requires Bluehill 3 or Partner v9.0a or higher software)
Note: Full bridge strain gauge transducers require Instron rationalization and Instron connector. Quarter-bridge or half-bridge circuits, e.g. bonded strain gauges, require external conditioning and BNC to Instron connector cable (cat. no. 2210-877).
| Description | Expansion Channel Module for 5900 Series |
|---|
- Adapter Cable, BNC sensor to 25 pin
- Electrical Adapter for 350 ohm Strain Gauges
Expansion Channel Module for 5900 Series Testing Systems
The Expansion Channel Module, Model 2210-920, allows users to add up to eight channels of signal conditioning and control. As an add-on to a basic 5900 system -- configured for load, extension, and up to three additional channels -- the Expansion Module provides up to a total of 13 transducers for simultaneous monitoring, feedback, and control. (Bluehill® 3 required)
- 제품소개
- 2/16/2011
- 282.0 KB